Description
Display Stand
Our interlocking display stand is perfect for shop counters or market stalls. They are ideal for storing products such as soap, balms, soap dishes, candles, jewellery, preserves, smaller toys etc.
Display Stand Features-
- made with interlocking components – quick to assemble.
- easily transported to and from markets.
- allows stock to be displayed clearly and allows pricing/info sheets to be attached. You can paint to suit your branding
- available in different syles in plywood: two-shelf narrow or wide, and three-shelf narrow or wide.
Plywood two-shelf display stand. Easy set up (and packing up) – all components interlock and there are no screws, hinges etc.
The top back board gives space to attach your pricing, logo, or information sheets.
Display Stand Measurements – Made from 12mm thick plywood. There are four sizes available – see below.
If you would like to discuss a customised size or an mdf version for painting, please contact us.
The three-shelf display stand is 50cm high, sits 43cm deep on the table and has shelves 12cm deep with 12cm vertical spacing between each shelf.
The two-shelf display stand is 35cm high, sits 30cm deep on the counter-top and has shelves 12cm deep with 12cm vertical spacing between each shelf.
Width
The narrow model measures 28cm (outside measurements) with internal shelf measurement for storage of 21.5cm wide.
The wide model is 42cm (outside measurement) with internal shelf storage size of 36cm.
As an example, for soap bars measuring 70 wide by 25 thick, the narrow 3-shelf model holds 36 bars and wide 3-shelf one, 60 bars.
If your preferred configuration is out-of-stock, you can order as a backorder.
Depending on workload, the typical turn-around time for this item is one-two weeks. NB – due to building supply constraints, the texture / colour of plywood used may vary from time to time.
Finishing – Can be supplied in MDF e.g. for painting, although it is advisable to “seal” the edges of mdf with solvent based primer i.e. do NOT use a water based primer.
MDF will “swell” when exposed to water, making the shelves difficult to assemble in to the slots in the backing board.
Plywood does not have these issues. For more information and tips about finishing, check out my comments here or read this useful guide.
